Skip to main content
Have a project in mind? Let's talk
Book a call Tell us about your project Book a Call
UK
  CIS Return Reminders

CIS Return Reminders: Monthly Dates, Verification and Prep for UK Contractors.

The dates and penalties from GOV.UK, a copyable CIS tracking table, and an automation that collects invoices, checks verification and reminds you while a person submits the return.

19thGOV.UK date for the monthly CIS return and the statements
22ndGOV.UK date to pay deductions to HMRC (19th if paying by post)
A person submitsWe design the prep and reminders, not an unattended submission

If you pay subcontractors under the Construction Industry Scheme, the same four jobs come round every month: check who you are paying, take the right deduction, send the return and pay HMRC. Each has its own date, and the dates are close together. Missing one costs a penalty. Doing them all by hand in a spreadsheet and an inbox is where misses tend to start.

Devvista is a software development company that designs and builds workflow automation for contractors, including the back-office steps around CIS. This page sets out what GOV.UK says about monthly returns, verification, deductions and penalties, gives you a tracking table you can copy, and then describes the automation we would design around it: a system that collects, checks and reminds, while a person approves and submits. To talk it through, describe your monthly routine. This is not tax advice: confirm your own position with your accountant or HMRC.

01

CIS Dates: Return, Statements, Payment and Records

Start with the dates, because everything else hangs on them. The figures below are taken from GOV.UK's guidance for CIS contractors, which we opened on 11 November 2026.

JobWhat GOV.UK saysPage we read
Send the monthly returnSend monthly returns to HMRC by the 19th of every month following the last tax month. For a tax month of 6 May to 5 June, the return must reach HMRC by 19 June.File your monthly returns
Give each subcontractor a payment and deduction statementIf you make deductions, you must give the subcontractor a statement within 14 days of the end of each tax month. For 6 May to 5 June, that is 19 June.Make deductions and pay subcontractors
Pay the deductions to HMRCPay HMRC every month by the 22nd, or the 19th if you pay by post. Late payment may bring interest and penalties.Pay deductions to HMRC
Verify a subcontractorBefore you pay a new subcontractor. Also for a previously used subcontractor who has not appeared on a CIS return in the current or last two tax years.Verify subcontractors
Keep recordsThe gross invoice value net of VAT, amounts withheld and, where you made deductions, the net-of-VAT cost of materials invoiced. Keep them for at least 3 years after the end of the tax year they relate to.Record keeping

A CIS tax month runs from the 6th of one month to the 5th of the next. That is the detail people get wrong when they work from the calendar month in their accounts package. The table below applies the 19th and 22nd rules to the 2026/27 tax year. The dates are our arithmetic from the rules above, not a table published by HMRC, so check any date that falls on a weekend or bank holiday and aim to submit earlier.

Tax monthReturn and statements by (19th)Pay HMRC by (22nd; 19th by post)Subcontractors paidAll verified?Return submitted by (name and date)
6 Apr to 5 May 202619 May 202622 May 2026
6 May to 5 Jun 202619 Jun 202622 Jun 2026
6 Jun to 5 Jul 202619 Jul 202622 Jul 2026
6 Jul to 5 Aug 202619 Aug 202622 Aug 2026
6 Aug to 5 Sep 202619 Sep 202622 Sep 2026
6 Sep to 5 Oct 202619 Oct 202622 Oct 2026
6 Oct to 5 Nov 202619 Nov 202622 Nov 2026
6 Nov to 5 Dec 202619 Dec 202622 Dec 2026
6 Dec 2026 to 5 Jan 202719 Jan 202722 Jan 2027
6 Jan to 5 Feb 202719 Feb 202722 Feb 2027
6 Feb to 5 Mar 202719 Mar 202722 Mar 2027
6 Mar to 5 Apr 202719 Apr 202722 Apr 2027

Copy it into a sheet and add one more column for the date you last checked HMRC's guidance. Rules change, and a table that was right last year may not be right now.

02

CIS Verification and Deduction Rates

Verification is the step people skip when a job starts in a hurry. GOV.UK says you must verify a new subcontractor before you pay them, and it tells you what to have to hand. You need your own Unique Taxpayer Reference, your HMRC accounts office reference and your employer reference. For the subcontractor you need their UTR and then, depending on how they trade, a National Insurance number for a sole trader, or the company name, company UTR and registration number for a limited company. For a partnership you need the details of the partnership's nominated contact, the trading name and the partnership UTR (GOV.UK, verify subcontractors).

Two details from that page matter for any system you build. First, GOV.UK warns that the details you supply "must exactly match" what the subcontractor used to register, so a typo or a nickname produces a failed check, not a partial one. Second, you cannot verify temporary National Insurance numbers, which start with "TN" or two digits. The page also says that if you need to verify more than 50 subcontractors you have to use commercial CIS software rather than the HMRC online service.

The result of verification is the deduction rate. HMRC tells you whether the subcontractor is registered for CIS and which rate applies, or whether you can pay them without deductions.

Subcontractor statusDeduction rateWhere we read it
Registered for CIS20 percentMake deductions and pay subcontractors
Not registered for CIS30 percentMake deductions and pay subcontractors
Gross payment status0 percent, paid without deductionsMake deductions and pay subcontractors

The deduction is not taken on the whole invoice. GOV.UK lists costs the subcontractor paid for that come off the invoice total before the rate is applied: VAT, consumable stores, fuel used (except for travelling), plant hire for the job, manufacturing or prefabricating materials, and materials the subcontractor paid for directly. You can ask for receipts, and if there are none you estimate the material cost. That is a judgement a person must make, and a good system flags it instead of deciding it.

03

What Changed From 6 April 2026, and What We Could Not Confirm

You will see claims online that CIS changed in April 2026. Some are right and some are loose, so here is what the primary sources say and what we could not find.

The HMRC policy paper on simplifying CIS administration gives 6 April 2026 as the date for two measures. The first requires contractors to file a nil return for any month in which they pay no subcontractors, unless they have told HMRC in advance that they will not be making payments that month. The paper says this reinstates a requirement removed in 2015. The second takes payments to local authorities and public bodies out of the scope of CIS (GOV.UK policy paper).

HMRC's Agent Update issue 143 adds the practical detail. A contractor chooses one of three options each month: file a return showing payments, file a nil return where no subcontractors were used, or submit an inactivity request, which lasts six months. The first affected period it names is 6 April to 5 May 2026, and penalties are issued only where a contractor has submitted neither an inactivity request nor a return (Agent Update 143).

What we left out. We found no change to verification on any GOV.UK page we opened, and nothing about HMRC letters on verification. Those claims came from accountancy commentary, so we do not repeat them. If you have a letter from HMRC, treat the letter as the authority.

04

CIS Late Return Penalties on GOV.UK

GOV.UK's monthly returns page lists the late-filing penalties. They are fixed amounts at first and tax-geared later, and they apply per return.

How latePenalty stated on GOV.UK
1 day late£100
2 months late£200
6 months late£300 or 5 percent of the CIS deductions on the return, whichever is higher
12 months lateThe same as at 6 months
More than 12 months lateA possible additional penalty of up to £3,000 or 100 percent of the deductions, whichever is higher
Wrong employment status for a subcontractor on the returnUp to £3,000

The same page says you can appeal within 30 days of the date on the penalty notice, online or in writing, and that you cannot appeal by phone (GOV.UK, file your monthly returns). Agent Update 143 sets out the penalties for a first affected period of 6 April to 5 May 2026: a fixed £100, a further £200 after 2 months, and tax-geared penalties at 6 and 12 months. It says penalties are issued only where a contractor has neither filed a return nor submitted an inactivity request. Whether a penalty is due in your case, or whether you have a reasonable excuse, is a question for HMRC and your adviser.

05

Where the Manual Routine Costs You Money

Penalties are the visible cost. The quieter costs are the hours and the wrong deductions. Here is where the manual routine usually leaks.

Where it leaksWhat goes wrongWhat it costs
Invoices arrive by email, WhatsApp and paperOne invoice is missed, so the return is short or a statement is wrongA corrected return, and a subcontractor who is paid the wrong net amount
Verification is done once and never revisitedA subcontractor who has not appeared on a return for over two tax years is paid without a fresh checkPaying at a rate you did not confirm
Details are retyped into the HMRC serviceA UTR or National Insurance number is mistyped and the check failsTime, and a payment held up while it is sorted
Materials are guessed at the end of the monthDeductions are taken on the full invoice, or the material cost has no evidenceSubcontractor disputes and an untidy audit trail
Nobody owns the 19thThe return is "someone's job" in the office, then the person is awayA fixed penalty that was avoidable
No month with no payments is recordedA quiet month passes with no nil return and no inactivity requestA penalty under the 2026 rule

None of these needs artificial intelligence to fix. They need a list that is always current, a step that reads the paperwork once, and a reminder that reaches the right person before the date, not on it.

06

The Automation: Collect, Check, Prepare, Remind, Then a Person Submits

The aim is a monthly routine that runs itself up to the point where a person must decide, and stops there. We would design it in five stages. A person approves at the end of stages two, three and five.

StageWhat the system doesWho decides
1. CollectReads the subcontractor invoices that arrive in a shared inbox or a folder, extracts the subcontractor, invoice date, gross value, VAT and any materials line, and files them against the right tax month (6th to 5th)Nobody: it is data entry
2. Check the registerLooks up each subcontractor in your register: UTR, verification date and the rate HMRC gave you. Flags a new name, a gap of more than two tax years since the last return, a missing UTR, or a temporary National Insurance numberA person confirms each flag
3. Prepare the figuresBuilds the month's schedule: gross, VAT, materials, deduction at the rate on record and net pay, with a note wherever a materials figure is an estimateA person reviews and signs off the schedule
4. Draft statements and remindersPrepares the payment and deduction statements, and sends reminders to the office on set days before the 19th and the 22ndNobody until someone sends them
5. Submit and recordThe prepared figures are ready to enter into your accounting package, commercial CIS software or the HMRC service. A person submits, then the system records who submitted and whenA person submits

We do not plan for the system to log into HMRC and submit on its own. Your Government Gateway details are yours, a person should be accountable for a legal return, and your accounting package may already do the submission step. What the automation does is remove the typing, the chasing and the forgetting.

For tools, we would usually start with n8n or Make for the routing, because they connect to inboxes, folders, spreadsheets and accounting packages without a large build. We would add custom code where a rule is yours alone, for example how you split materials on a particular type of job. Claude reads the invoices, which arrive as PDFs, photos and email text in different layouts. Every figure it extracts is shown next to the original so a person can see where it came from. This is a design description. We are not citing a client result for it.

07

The Subcontractor Register Behind It

The register is the heart of it. A single table, one row per subcontractor, that every other step reads from.

FieldWhy it is there
Name as registered with HMRCVerification must match exactly, so keep the registered name apart from the name on the van
Trading typeSole trader, limited company or partnership decides which details you need to verify
UTR and, where relevant, National Insurance number or company numberNeeded for verification; restricted to the people who need it
Date verified and the rate returnedEvidence for the 20, 30 or 0 percent you applied
Last tax month they appeared on a returnDrives the check for a gap of more than two tax years
Contact for invoices and statementsSo reminders and statements go to the right inbox

If you run job costing or an ERP as well, the register can live there and feed this process. Our notes on construction accounting software, construction job costing and construction ERP cover how that wider data fits together. If your accounting package already holds subcontractors and deductions, we would read from it rather than build a second list.

08

UK GDPR and Subcontractor Data

A CIS register holds personal data: names, UTRs, National Insurance numbers and sometimes bank details. UK GDPR applies to a sole trader subcontractor's details in the same way it applies to an employee's. We are developers, not lawyers, so confirm your obligations with your adviser. What we can say is how we would handle the build.

If a supplier, including us, handles that data for you, Article 28 of UK GDPR asks for a written contract, action only on your documented instructions, confidentiality for the people involved, and deletion or return of the data at your choice. It also requires prior written authorisation before a processor brings in another processor (Article 28, legislation.gov.uk).

  • Keep less. Hold National Insurance numbers only where verification needs them, and restrict who can see them.
  • Name the tools. If an AI model reads invoices, record which one, what data it receives and where it is processed, and check that against your contract terms before go-live.
  • Log access. The register should show who viewed or changed a subcontractor's details.
  • Plan deletion. Records such as invoices follow the three-year rule on GOV.UK's record-keeping page, so decide what stays and for how long.
09

When Not to Automate CIS

Automation is not always the right answer for CIS. We would tell you to stop here if any of these is true.

Your situationWhat we would suggest instead
You pay a handful of subcontractors and your accountant or payroll bureau already files the returnKeep the arrangement. Ask for a calendar reminder and a shared verification log
Your accounting or payroll package already has a CIS module that you use fullyUse it. Add only the missing piece, such as invoice capture
Your records are not reliable yet: no register, no consistent invoice namingTidy the process first. Automating confusion makes it faster, not better
You want a system to submit to HMRC without anyone checkingWe would not build that. A person should approve and submit a legal return
You pay subcontractors on one project a yearA checklist and a reminder is enough

If the answer is a calendar and a spreadsheet, we will say so on the first call. For a wider look at what else in a contractor's office can be automated, see our AI automation page, and the US hub on AI automation for construction companies for the general approach, which does not depend on UK rules.

10

How a Build Runs and What Moves the Quote

A small build of this kind usually runs in these steps.

  1. Walk through one month. We look at last month's invoices, your register and how the return was prepared and submitted.
  2. Agree the rules in writing. Tax month boundaries, who approves what, how materials are treated and what gets flagged.
  3. Prototype on last month's data. You compare the system's figures with what you actually filed.
  4. Run alongside the old routine for a cycle. The prepared figures are checked before anything is entered anywhere.
  5. Hand over. Documentation, access in your accounts and a named person on your side who owns the monthly routine.

Prices vary with scope. What moves a quote is the number of subcontractors, how invoices reach you, whether an accounting package or commercial CIS software is in use, how many companies or sites you run and how much of the register already exists in clean form. Tell us your budget range and we will propose what fits in pounds sterling.

11

Who This Suits and Your Next Step

This suits UK contractors and groundworkers, specialist trades and small main contractors who pay several subcontractors each month, receive their invoices in a messy mix of channels and have been bitten once by a late return or a wrong deduction. It does not suit a firm that wants a promise about outcomes. We make no promise about penalties avoided, because the facts depend on your records.

A good fitProbably not
Several subcontractors each month, invoices in mixed formatsOccasional subcontractors and an accountant who files for you
A person on your side who will own the monthly routineNo one has time to review the prepared figures
You use Xero, Sage, QuickBooks or similar and want the data to flow inYou want one more standalone tool to log into
You are happy for a person to approve and submitYou want a bot to submit on your behalf

Ready to describe your month? Use the contact form, tell us roughly how many subcontractors you pay and the budget range you have in mind, and we will come back after a short call with a written proposal. You can also look at our custom software development service, or go back to the UK home page.

Straight Answers.

Still have a question?Send it over and we will answer personally.Send Your Question

GOV.UK says to send monthly returns to HMRC by the 19th of every month following the last tax month. For the tax month 6 May to 5 June, it must reach HMRC by 19 June. The tax month runs from the 6th to the 5th, not the calendar month.

It is the check you make with HMRC before paying a new subcontractor. GOV.UK says HMRC tells you whether the subcontractor is registered for CIS and which deduction rate to use, or whether you can pay without deductions. You must also verify a subcontractor who has not appeared on a CIS return in the current or last two tax years.

Your own UTR, accounts office reference and employer reference, plus the subcontractor's UTR and, for a sole trader, a National Insurance number, or for a limited company the company name, company UTR and registration number. GOV.UK says the details must exactly match what the subcontractor used to register.

GOV.UK lists 20 percent for registered subcontractors, 30 percent for unregistered subcontractors and 0 percent for subcontractors with gross payment status. HMRC tells you the rate when you verify.

HMRC's policy paper says that from 6 April 2026 contractors must file a nil return for a month in which they pay no subcontractors, unless they have told HMRC in advance. Agent Update 143 says you can instead submit an inactivity request, which lasts six months.

GOV.UK states £100 for one day late, £200 at two months, and at six months £300 or 5 percent of the CIS deductions, whichever is higher. Later penalties can be higher still. You can appeal within 30 days of the date on the notice.

We found no change to verification on the GOV.UK pages we opened. The measures we could confirm from the HMRC policy paper concern nil returns and the removal of payments to local authorities and public bodies from CIS scope. If you hold an HMRC letter that says otherwise, follow the letter and ask your adviser.

GOV.UK says you can file through the HMRC CIS online service or commercial CIS software. We would design the preparation and reminders and leave the submission to a named person, so that someone is accountable for a legal return.

Yes, as a first step. A model such as Claude can extract the subcontractor, date, gross, VAT and materials from different invoice layouts, and the system shows each figure beside the original so a person can check it. Anything unclear is flagged, not guessed.

It depends on how many subcontractors you pay, how invoices reach you, which accounting or CIS software you use and how clean your register is. We begin with a short call about your budget range, then propose a scope in pounds sterling that fits it.

No. We build software, and we are not your accountant. The dates and penalties on this page come from GOV.UK pages opened on 11 November 2026 and can change, so check the current guidance and your own position with an accountant or HMRC.
United Kingdom

Describe your monthly CIS routine

Tell us how many subcontractors you pay, how their invoices reach you and what accounting software you use. Book a call and we will say what to automate, what to leave alone and what the first release should contain.

  • 30-minute online call
  • Honest feedback on fit
  • No obligation
  1. Book a call30 minutes online. Tell us what you want to build.
  2. Get a straight answerHonest feedback on fit and scope.
  3. DecideYou choose the next step once the scope is clear.
Chat on WhatsApp