Skip to main content
Have a project in mind? Let's talk
Book a call Tell us about your project Book a Call
AU
  Manufacturing ERP

Manufacturing ERP Software for Australian Manufacturers: From Bill of Materials to Invoice.

What a manufacturing ERP covers, when a ready system is enough, how Odoo documents production, and how GST, payments and couriers fit.

BoM to invoiceOne record from order to dispatch
Shop floorWork orders and time tracking
GST and ABADocumented by Odoo for Australia

A small manufacturer rarely lacks data. The bill of materials is in one spreadsheet, the schedule on a whiteboard, stock in the accounting package, and the real cost of a job in the owner's head. An ERP for manufacturing joins those into one record, so a sales order can turn into a production order, a purchase and an invoice without re-keying.

We build ERP and production-management systems for manufacturers, including Australian makers that outgrew spreadsheets. This page explains what a manufacturing ERP covers, when a ready system is enough, how Odoo's manufacturing app is documented, and where Australian GST, payments and couriers fit. To start, tell us what you make and how it moves through the shop.

01

Which Manufacturers Need an ERP, and Which Do Not

Not every manufacturer needs the same depth. Match the tool to how your production really works.

Your productionTypical needUsually right
Made to order, a few steps, one siteQuotes, job tracking, purchasing, invoicesA job-costing or accounting package with a few extensions
Repeat products with bills of materials and stockBoMs, production orders, stock, purchasing, costingA manufacturing ERP such as Odoo, configured
Several work centres, routings and shop-floor trackingWork orders, time tracking, scheduling, quality checksA manufacturing ERP with shop-floor screens
Unusual process, regulated records or machine dataSpecific traceability, integrations, custom screensERP plus custom modules

If a ready product fits, we say so. Our custom software development page explains how we weigh buying against building.

02

What a Manufacturing ERP Should Cover: The Odoo Documentation as a Checklist

The Odoo 18 documentation lists the manufacturing topics below. We use it as an example because it is a common choice and its features are published, but the same checklist applies to any ERP you assess.

CapabilityWhat the documentation listsWhy it matters on the floor
Bills of materialsBasic BoM setup, BoMs for product variants and multilevel BoMsOne recipe per product, including sub-assemblies, so material needs are calculated, not guessed
Work centresWork centres and work-centre time offCapacity is modelled by machine or station, including when it is unavailable
Work ordersA work-centre control panel to control work orders in real time from shop-floor tablets, and work-order dependenciesOperators see the next job and its steps; steps can wait on earlier ones
PlanningMaster production scheduleProduction is planned against forecast demand, not only against today's orders
Shop floorShop Floor overview and time trackingTime actually spent on jobs is recorded, which feeds costing
SubcontractingSubcontracting is documentedWork sent to an outside processor stays on the same record
ReportingReporting including overall equipment effectivenessA standard measure of how well equipment is used
ExceptionsBackorders, scrap and unbuild ordersPartial runs, waste and reversals are recorded rather than lost

Source: Odoo 18.0 Manufacturing documentation. The index page does not cover quality checks or maintenance in detail, so we confirm those with you against the current documentation before scoping them.

03

GST, Costing, Supplier Payments and Couriers in Australia

The documentation we read for Australia says the standard GST rate is 10 percent and that taxes carry their rate in the name (Odoo 18.0 Australia localisation). For a manufacturer that means GST codes on raw materials, finished goods and freight lines, which your accountant should review.

  • Costing and stock value. Material, labour and overhead are recorded per production order. How stock is valued for your books is your accountant's decision, and we configure to their instruction.
  • Supplier payments. The localisation describes generating an ABA file from a batch of vendor payments to upload to your bank, which suits a weekly raw-material payment run.
  • Shipping. It lists Starshipit as a connection for Australasian couriers, useful if you send finished goods by parcel.
  • Your accounts. If you already use Xero or MYOB, we decide whether the ERP replaces it or feeds it, with your accountant.

For the wider Odoo set-up in Australia, including BAS, TPAR and Peppol as documented, read our Odoo implementation page.

04

Rolling It Out in Releases

Manufacturing software goes wrong when the first release tries to do everything. We usually split work into releases that each retire a spreadsheet.

ReleaseScopeWhat you can stop doing
OneProducts, bills of materials, suppliers, purchasing and stockRe-keying material lists and chasing stock by phone
TwoProduction orders, work centres, work orders and scrapPaper job cards and whiteboard scheduling
ThreeCosting, reporting, customer quoting and invoicesEstimating job profit after the fact
FourIntegrations, portals, planning and custom stepsManual couriers, order entry and status emails

Planning and demand forecasting can also be extended. Our AI automation page covers reporting and document handling that can sit on top of production data.

05

Where Manufacturing Projects Go Wrong

The most common implementation problems are about people and data, not features.

  • Bills of materials that are wrong. If the recipe in the system does not match the recipe on the floor, nothing downstream can be trusted. We walk the floor and check a sample of products.
  • Units of measure. Buying in sheets, using in square metres and selling in units needs conversions set up once and tested.
  • Operators who will not scan. Screens must be quick and usable with gloves or one hand. We test them with the people who will use them.
  • Stock that is not counted. Starting from an inaccurate count makes every report suspect. See our warehouse management software page for scanning and counting.
  • Too much customisation. Each custom module has to be carried through upgrades, so we build only what the standard app cannot do.
06

How a Devvista Manufacturing Project Runs

Each project starts with a short online call and ends with a handover you can run without us.

  1. Floor walk by video. We review how jobs move from quote to dispatch and look at your bills of materials.
  2. Scope and proposal. We write the scope down, with what is in release one and what is not.
  3. Weekly demos. You see real screens each week, using your own products.
  4. Staging and pilot. We usually propose a staging copy and a pilot on one product family before cut-over.
  5. Opening position. A counted stock position and reconciled balances at the cut-over date.
  6. Handover. Documentation, training, accounts in your name and an agreed support arrangement.

Production recipes and supplier terms are commercially sensitive, so we work under an NDA if you want one. See our case studies for delivered work across the company.

07

When Devvista Is a Good Fit, and When It Is Not

We are a good fit ifA ready system is probably better if
Your process has steps a standard flow does not coverYou make standard products with a standard process
You want to own the system and its codeYou prefer to rent and let the vendor run it
You want one stock and cost figure across sales, production and accountsA single accounting package already tracks your jobs well
You are happy with weekly demos and video callsYou want the vendor to run and host it for you

Tell us what you make and we will say whether to keep your tools, connect them or build. For the sales side, see business management software, and for the Australian home page everything else we offer.

Straight Answers.

Still have a question?Send it over and we will answer personally.Send Your Question

It is one system that links sales, purchasing, stock, production, costing and accounts, so a sales order becomes a production order and an invoice without re-keying. We build such systems for manufacturers.

Not always. If you make to order with a few steps, a job-costing or accounting package may be enough. An ERP earns its place when you have repeat products, bills of materials, several work centres or stock that must tie to production.

The Odoo 18 documentation lists bills of materials including multilevel and variants, work centres, work orders with shop-floor tablets, a master production schedule, time tracking, subcontracting, overall equipment effectiveness reporting, backorders, scrap and unbuild orders.

The Odoo Australia documentation states a standard GST rate of 10 percent, with tax names that carry their rate. We set GST codes on materials, products and freight with your accountant before go-live.

The Odoo documentation describes creating an ABA file from a batch of vendor payments, which you upload to your bank. Supplier BSB and account details are needed.

The Australia documentation lists Starshipit for Australasian couriers. For other couriers, we open their developer documentation and confirm access terms before promising a connection.

Sometimes. Many manufacturers keep their accounting package and feed it from the ERP. We decide with your accountant, because the books are their responsibility.

We check a sample of products against what happens on the floor before loading anything. Correcting recipes is a normal first task and is usually worth doing even before software.

It depends on products, work centres, integrations and data quality. We split work into releases that each remove a spreadsheet, and the proposal carries a dated plan.

Meetings are held by video call at a time that suits you.

Tell us what you make, how many people will use the system and your rough budget. We take it from there on a short online call.
Australia

Tell us what you make and how it moves through the shop

Describe your products and work centres. Book a call and we will say whether to keep, connect or build.

  • 30-minute online call
  • Honest feedback on fit
  • No obligation
  1. Book a call30 minutes online. Tell us what you want to build.
  2. Get a straight answerHonest feedback on fit and scope.
  3. DecideYou choose the next step once the scope is clear.
Chat on WhatsApp